Maintenance and maintenance of equipment for preparing tungsten super shot

The disc pelletizing method is used to prepare tungsten super shot. The main equipment used is the disc pelletizing machine. The maintenance and maintenance of the equipment can improve the operating efficiency of the equipment, extend the life of the equipment, reduce the loss of the equipment, and increase the productivity of tungsten alloy balls. . So how to maintain the disc pelletizing machine? Zhuzhou Jinxin gave some suggestions here.

1. Check the lubrication of each part, and inject appropriate amount of lubricating oil in time

2. Open the raw material supply valve after the ball disc rotates smoothly.

3. Frequently perform tightening inspections (inspection when the equipment is running) to check whether the bolt connections of the foundations and other parts are loose, and the loose should be handled in time.

4. The state of the gear meshing working surface should be checked regularly, especially in the early stage of work, when the tooth surface is scratched, if the scratched area is not more than 20% of the tooth surface working surface, a slight trimming with oil stone and scraper is allowed.

5. When the motor is running, check whether the current and voltage are within the allowable range, whether the connector is hot, and whether the grounding system is good, etc. If an abnormal situation is found, it should be dealt with in time.

The above is a small suggestion for the maintenance of the disc pelletizing machine for preparing tungsten balls. Zhuzhou Jinxin has more than ten years of experience in the production and processing of cemented carbide products. The technicians and operators are very familiar with the products and equipment. They operate the equipment in strict accordance with the production and operation specifications, and abide by the production process documents, safety, and equipment operating procedures. Implement product quality standard process regulations. It is a cooperative enterprise worthy of entrusting the production and processing of cemented carbide products.